亚洲乱亚洲乱码11p_亚洲va中文字幕无码久_男女羞羞视频无遮挡网站_h成年动漫在线看网站无码

Welcome to the official website of the Taian Haishu Machinery Co., Ltd.,Service Phone:0086-0538-8606169ChineseEnglishSitemapEnterprise MailboxContact Us

Sale Of CNC Lathe

Senior Expert Of CNC Lathe

Global Service Hotline

0086-0538-8606169

Notice:
Warm congratulations "HAISHU" brand CNC machine tool exports reached 40 countries. They are: the United States, Britain, Germany, Sweden, Italy, Russia, Turkey, New Zealand, Colombia, South Korea, Bahrain, South Africa and other countries. "HAISHU" brand has been known at home and abroad.
Contact Us
Global Hotline:
+86-538-8606169

Taian Haishu Machinery Co.,Ltd.

Telephone: +86-538-8606169

Fax: +86-538-8606169

Address: Zhouwangzhuang Village, Shankou Town

             Taian City Shandong Province China

Current Location:Home Page » Service » Common Question
CNC lathe and CNC lathe instrument of general maintenance
From:Taian Haishu Machinery Co.,Ltd. Updatetime:2015-11-13 8:25:29 Views:
Numerical control equipment is a high degree of automation, numerical control machine tool control system structure is more complex, advanced processing equipment is the key of the enterprise, the key equipment. Want to develop the high ben
A, numerical control equipment maintenance knowledge
Numerical control equipment is a high degree of automation, numerical control machine tool control system structure is more complex, advanced processing equipment is the key of the enterprise, the key equipment.Want to develop the high benefit of numerical control equipment, it has to be the correct operation and maintenance of carefully, to ensure that the utilization rate of equipment.Correct operation can prevent machine abnormal wear, avoid sudden fault;Do daily maintenance, can make the equipment in good technical status, slow degradation process, discover and eliminate the problems in time, to ensure safe operation.
1, numerical control equipment in use problems should be paid attention to
1.1 the use environment of nc equipment
In order to improve the service life of the numerical control equipment, numerical control machine tool control system general requirements to avoid direct sunlight and other heat radiation, avoid too wet, too much dust or the places where corrosive gas.Corrosion of gas is easy to make electronic components from corrosion metamorphism, causing poor contact or short circuit between components, affect the normal operation of the equipment.Precision of the numerical control equipment to stay away from vibration equipment, such as punching, forging equipment, etc.
1.2 the power requirements
In order to avoid the power fluctuation big (more than + / - 10%) and the possible interference signals, such as instant, nc equipment generally USES special line of power supply (such as from low voltage transformer room alone all the way for the use of numerical control machine tools) or additional voltage stabilizer, etc., can reduce the influence of the quality of power supply and electrical interference.
1.3 operation procedures
Operation procedure is one of the important measures to guarantee the safe operation of the CNC machine, one of the operator must according to the operation manual operation.Machine tool failure occurs, the operator should pay attention to keep the scene, and explain to maintenance personnel according to the facts before and after the malfunction, benefit analysis and diagnose the fault reason, ruled out in a timely manner.
In addition, the numerical control machine tool should not be long time need not, buy nc machine tool nc machine tool control system should make full use of, especially put into use in the first year, makes it easy to fail the weak link of exposed as soon as possible, to rule out during the warranty period.Without processing task, nc machine tools are regularly electricity, it is best to electrify 1-2 times a week, every time an empty running 1 hour or so, to take advantage of the machine tool itself calorific value to reduce the humidity inside the machine, make the electronic components shall not be affected with damp be affected with damp, at the same time can also be found in a timely manner without battery alarm occurs, in order to prevent the loss of the system software, parameter.
  【Close】
News
Product

CNC lathe research and development, every problem we can not be ignored!

How to make my machine have a longer service life?

How to make the equipment have higher production efficiency?

How to ensure that the machine is simple to learn?

... ...

Learn CNC lathes

From the beginning our website!

Global Service Hotline:+86-0538-8606169

Taian Haishu Machinery Co., Ltd.
Address:Zhouwangzhuang Village, Shankou Town Taian City Shandong Province China
Telephone:+86-538-8606169
Fax:+86-538-8606169
Copyright © 2015 HaiShu All rights reserved.