亚洲乱亚洲乱码11p_亚洲va中文字幕无码久_男女羞羞视频无遮挡网站_h成年动漫在线看网站无码

Welcome to the official website of the Taian Haishu Machinery Co., Ltd.,Service Phone:0086-0538-8606169ChineseEnglishSitemapEnterprise MailboxContact Us

Sale Of CNC Lathe

Senior Expert Of CNC Lathe

Global Service Hotline

0086-0538-8606169

Notice:
Warm congratulations "HAISHU" brand CNC machine tool exports reached 40 countries. They are: the United States, Britain, Germany, Sweden, Italy, Russia, Turkey, New Zealand, Colombia, South Korea, Bahrain, South Africa and other countries. "HAISHU" brand has been known at home and abroad.
Contact Us
Global Hotline:
+86-538-8606169

Taian Haishu Machinery Co.,Ltd.

Telephone: +86-538-8606169

Fax: +86-538-8606169

Address: Zhouwangzhuang Village, Shankou Town

             Taian City Shandong Province China

Current Location:Home Page » News » Company News
Discussion on self diagnosis function of cnc lathe
From:Taian Haishu Machinery Co.,Ltd. Updatetime:2022-12-26 16:17:08 Views:
When the CNC lathe is running, the CNC system monitors the operation of the lathe at all times. The CNC device monitors the operation of the servo system and PLC system.

Discussion on self diagnosis function of cnc lathe
When the CNC lathe is running, the CNC system monitors the operation of the lathe at all times. The CNC device monitors the operation of the servo system and PLC system. If any problem is found, it will alarm in time, and many faults will display alarm information on the screen. When the machine tool is running, the PLC device monitors the operation of the numerical control machine tool in real time through the user program compiled by the machine tool manufacturer. If a fault is found or the issued command is not executed, the corresponding signal is transmitted to the numerical control device in time, and the numerical control device will display alarm information on the screen.

After the CNC system is powered on, it must run the startup self diagnostic program to detect various connected control devices, and immediately report any problems found. For example, check whether the voltage of the backup battery meets the requirements. If the voltage is lower than the requirements, the system will generate an alarm. The battery alarm of the Siemens system is a No. i alarm, prompting the maintenance personnel to replace the battery immediately. If the battery cannot be replaced, the power cannot be cut before replacing the battery.

  【Close】
News
Product

CNC lathe research and development, every problem we can not be ignored!

How to make my machine have a longer service life?

How to make the equipment have higher production efficiency?

How to ensure that the machine is simple to learn?

... ...

Learn CNC lathes

From the beginning our website!

Global Service Hotline:+86-0538-8606169

Taian Haishu Machinery Co., Ltd.
Address:Zhouwangzhuang Village, Shankou Town Taian City Shandong Province China
Telephone:+86-538-8606169
Fax:+86-538-8606169
Copyright © 2015 HaiShu All rights reserved.